INC指令

INC指令是一個用於操作數遞增。它可以在一個單一的操作數，可以是在一個寄存器或內存。

語法:

INC指令的語法如下：

INC destination

操作數目標可能是8位，16位或32位操作數。

例子:

INC EBX	     ; Increments 32-bit register
INC DL       ; Increments 8-bit register
INC [count]  ; Increments the count variable

DEC指令

DEC指令用於由一個操作數遞減。它可以在一個單一的操作數，可以是在一個寄存器或內存。

語法:

DEC指令的語法如下：

DEC destination

操作數目標可以是8位，16位或32位操作數。

例子:

segment .data
	count dw  0
	value db  15
segment .text
	inc [count]
	dec [value]
	mov ebx, count
	inc word [ebx]
	mov esi, value
	dec byte [esi]

ADD和SUB指令

ADD和SUB指令用於執行二進制數據字節，字和雙字的大小，即簡單的加法/減法，8位，16位或32位操作數分別相加或相減。

語法:

ADD和SUB指令的語法如下：

ADD/SUB	destination, source

ADD/ SUB指令之間可能發生：

寄存器到寄存器
內存到寄存器
寄存器到內存
寄存器到常量數據
內存到常量數據

然而，像其他指令，內存到內存的操作是不可能使用ADD/ SUB指令。 ADD或SUB操作設置或清除溢出和進位標誌。

例子:

下面的例子會從用戶要求的兩個數字，分別在EAX和EBX寄存器存儲的數字，增加值，並將結果存儲在一個內存位置'清晰度'，並最終顯示結果。

SYS_EXIT  equ 1
SYS_READ  equ 3
SYS_WRITE equ 4
STDIN     equ 0
STDOUT    equ 1

segment .data 

    msg1 db "Enter a digit ", 0xA,0xD 
    len1 equ $- msg1 

    msg2 db "Please enter a second digit", 0xA,0xD 
    len2 equ $- msg2 

    msg3 db "The sum is: "
    len3 equ $- msg3

segment .bss

    num1 resb 2 
    num2 resb 2 
    res resb 1    

section	.text
    global _start    ;must be declared for using gcc
_start:    ;tell linker entry yiibai
    mov eax, SYS_WRITE         
    mov ebx, STDOUT         
    mov ecx, msg1         
    mov edx, len1 
    int 0x80                

    mov eax, SYS_READ 
    mov ebx, STDIN  
    mov ecx, num1 
    mov edx, 2
    int 0x80            

    mov eax, SYS_WRITE        
    mov ebx, STDOUT         
    mov ecx, msg2          
    mov edx, len2         
    int 0x80

    mov eax, SYS_READ  
    mov ebx, STDIN  
    mov ecx, num2 
    mov edx, 2
    int 0x80        

    mov eax, SYS_WRITE         
    mov ebx, STDOUT         
    mov ecx, msg3          
    mov edx, len3         
    int 0x80

    ; moving the first number to eax register and second number to ebx
    ; and subtracting ascii '0' to convert it into a decimal number
    mov eax, [number1]
    sub eax, '0'
    mov ebx, [number2]
    sub ebx, '0'

    ; add eax and ebx
    add eax, ebx
    ; add '0' to to convert the sum from decimal to ASCII
    add eax, '0'

    ; storing the sum in memory location res
    mov [res], eax

    ; print the sum 
    mov eax, SYS_WRITE        
    mov ebx, STDOUT
    mov ecx, res         
    mov edx, 1        
    int 0x80
exit:    
    mov eax, SYS_EXIT   
    xor ebx, ebx 
    int 0x80

上面的代碼編譯和執行時，它會產生以下結果：

Enter a digit:
3
Please enter a second digit:
4
The sum is:
7

該程序用硬編碼的變量：

section	.text
    global _start    ;must be declared for using gcc
_start:    ;tell linker entry yiibai
	mov	eax,'3'
	sub     eax, '0'
	mov 	ebx, '4'
	sub     ebx, '0'
	add 	eax, ebx
	add	eax, '0'
	mov 	[sum], eax
	mov	ecx,msg	
	mov	edx, len
	mov	ebx,1	;file descriptor (stdout)
	mov	eax,4	;system call number (sys_write)
	int	0x80	;call kernel
	mov	ecx,sum
	mov	edx, 1
	mov	ebx,1	;file descriptor (stdout)
	mov	eax,4	;system call number (sys_write)
	int	0x80	;call kernel
	mov	eax,1	;system call number (sys_exit)
	int	0x80	;call kernel

section .data
	msg db "The sum is:", 0xA,0xD 
	len equ $ - msg   
	segment .bss
	sum resb 1

上面的代碼編譯和執行時，它會產生以下結果：

The sum is:
7

MUL/ IMUL指令

有兩個指令乘以二進制數據。 MUL（乘）指令處理無符號數據和IMUL（整數乘法）處理有符號數據。這兩個指令影響進位和溢出標誌。

語法:

MUL/ IMUL指令，語法如下：

MUL/IMUL multiplier

在這兩種情況被乘數是在累加器中，根據被乘數和乘數的大小，所產生的產物也被存儲在操作數，大小取決於兩個寄存器。下面一節的解釋MULL有三種不同的情況指令：

SN

Scenarios

1

When two bytes are multiplied

The multiplicand is in the AL register, and the multiplier is a byte in the memory or in another register. The product is in AX. High order 8 bits of the product is stored in AH and the low order 8 bits are stored in AL

8 bit Source Registers in MUL instruction

2

When two one-word values are multiplied

The multiplicand should be in the AX register, and the multiplier is a word in memory or another register. For example, for an instruction like MUL DX, you must store the multiplier in DX and the multiplicand in AX.

The resultant product is a double word, which will need two registers. The High order (leftmost) portion gets stored in DX and the lower-order (rightmost) portion gets stored in AX.

16 bit Source Registers in MUL instruction

3

When two doubleword values are multiplied

When two doubleword values are multiplied, the multiplicand should be in EAX and the multiplier is a doubleword value stored in memory or in another register. The product generated is stored in the EDX:EAX registers, i.e., the high order 32 bits gets stored in the EDX register and the low order 32-bits are stored in the EAX register.

32 bit Source Registers in MUL instruction

例子:

MOV AL, 10
MOV DL, 25
MUL DL
...
MOV DL, 0FFH	; DL= -1
MOV AL, 0BEH	; AL = -66
IMUL DL

例子:

下面的示例與2乘以3，並顯示結果：

section	.text
    global _start    ;must be declared for using gcc
_start:    ;tell linker entry yiibai

	mov	al,'3'
	sub     al, '0'
	mov 	bl, '2'
	sub     bl, '0'
	mul 	bl
	add	al, '0'
	mov 	[res], al
	mov	ecx,msg	
	mov	edx, len
	mov	ebx,1	;file descriptor (stdout)
	mov	eax,4	;system call number (sys_write)
	int	0x80	;call kernel
	mov	ecx,res
	mov	edx, 1
	mov	ebx,1	;file descriptor (stdout)
	mov	eax,4	;system call number (sys_write)
	int	0x80	;call kernel
	mov	eax,1	;system call number (sys_exit)
	int	0x80	;call kernel

section .data
msg db "The result is:", 0xA,0xD 
len equ $- msg   
segment .bss
res resb 1

上面的代碼編譯和執行時，它會產生以下結果：

The result is:
6

DIV/IDIV 指令

除法運算產生兩個元素 - 一個商和餘數。在乘法運算的情況下，不會發生溢出，因爲雙倍長度的寄存器是用來保持產生。然而，在除法的情況下，可能會發生溢出。處理器產生一箇中斷，如果發生溢出。

DIV（除）指令或無符號數據和IDIV（整數除法）用於有符號數據。

語法:

DIV / IDIV指令的格式爲：

DIV/IDIV	divisor

被除數是在累加器。兩個指令可以處理8位，16位或32位操作數。該操作會影響所有的6個狀態標誌。以下部分說明了三個例子的劃分有不同的操作數大小：

SN

Scenarios

1

When the divisor is 1 byte

The dividend is assumed to be in the AX register (16 bits). After division, the quotient goes to the AL register and the remainder goes to the AH register.

DIV instruction

2

When the divisor is 1 word

The dividend is assumed to be 32 bits long and in the DX:AX registers. The high order 16 bits are in DX and the low order 16 bits are in AX. After division, the 16 bit quotient goes to the AX register and the 16 bit remainder goes to the DX register.

DIV instruction

3

When the divisor is doubleword

The dividend is assumed to be 64 bits long and in the EDX:EAX registers. The high order 32 bits are in EDX and the low order 32 bits are in EAX. After division, the 32 bit quotient goes to the EAX register and the 32 bit remainder goes to the EDX register.

DIV instruction

例子:

下面的例子8除於2。8被存儲在16位寄存器EAX和除數2被存儲在8位BL寄存器。

section	.text
    global _start    ;must be declared for using gcc
_start:    ;tell linker entry yiibai
	mov	ax,'8'
	sub     ax, '0'
	mov 	bl, '2'
	sub     bl, '0'
	div 	bl
	add	ax, '0'
	mov 	[res], ax
	mov	ecx,msg	
	mov	edx, len
	mov	ebx,1	;file descriptor (stdout)
	mov	eax,4	;system call number (sys_write)
	int	0x80	;call kernel
	mov	ecx,res
	mov	edx, 1
	mov	ebx,1	;file descriptor (stdout)
	mov	eax,4	;system call number (sys_write)
	int	0x80	;call kernel
	mov	eax,1	;system call number (sys_exit)
	int	0x80	;call kernel

section .data
msg db "The result is:", 0xA,0xD 
len equ $- msg   
segment .bss
res resb 1

上面的代碼編譯和執行時，它會產生以下結果：

The result is:
4

Assembly彙編

Assembly彙編